|  | 
					Воспоминания о лете и отпуске 
					Миниатюра вышитая крестом, 
					в которую вшита объёмная  
					морская звезда  3D эффектом 
					Мастер-класс по вышивке 
					Описание есть, но на английском | 
|  | 
					1 Position a pin vertically through 
					your fabric at the point of the first 
					arm of the starfish. Push your needle 
					and three strands of thread up at (1), 
					wrap behind the pin and push the 
					needle down at (2). | |
|  | 
					2 Bring the needle and thread up at (3), 
					wrap behind the pin head in the direction 
					of (4), creating three vertical stitches 
					to form the ‘frame’ of the woven picot 
					stitch. | |
|  | 
					3 Next, start weaving the needle and 
					thread under and over the three vertical 
					stitches in the direction of (5). 
					Don’t stitch through the fabric at 
					any stage of your weaving. | |
|  | 
					4 Then weave the needle over and under 
					the three vertical stitches in the 
					opposite direction, as per (6). | |
|  | 
					5 Continue working back and forth, 
					alternating the weave direction, building 
					up your stitch down the length of the 
					three vertical stitches. | |
|  | 
					6 When you get to the 
					base of the ‘frame’, push the needle to 
					the back of the fabric and secure under 
					nearby stitches, then remove the pin. | |
|  | 
					7 You can leave the woven picot stitch 
					as it is and have fun shaping the starfish 
					arm to create a 3D effect, or you can stitch 
					it to the fabric at the tip with a small 
					single stitch. | |
|  | 
					8 Repeat steps 1-7 to create four more 
					woven picot stitches at angles around your 
					central whole stitches, using the chart as 
					a guide. 
					This will create a 3D effect starfish! | 
	 
  
 