• Авторизация


Цепь 05-08-2014 14:20 к комментариям - к полной версии - понравилось!


How To Viking KnitPlease click on any picture to enlarge for a close up view.
Step 1
Wrap the bronze color wire around a 
credit card 5 times
Step 2
Slide the wire off and wrap one end 
around like shown above.
Step 3
Pull out the 5 pieces to form equal spaced points. Front and side views.
Step 4
With a pen or marker, draw a 5 point 
star.
Step 5
Draw lines that connect to the star 
pattern on the end.
Line up the wire ends with the lines.
The Lines are not shown in this 
photo.
Step 7
Tape the wire in place.
Step 8
Fold down the long wire along one of 
the points.
Step 9
Start looping the wire this way.
Step 10
Continue looping the wire through 
the points around the rod.
Step 11
may need to enlarge this photo.may 
need to enlarge this photo.
Step 12
loop from the bottom.
Step 13
Use the Viking Knit tool to poke 
under the loops if there isn't enough 
space to slide the wire under.
Step 14
Cut the wire leaving about a 1/4"
Step 15
Start the silver wire by sliding it in 
from this direction.
Step 16
Start the silver wire at the ending 
point of the copper knit. Notice the 
1/4" of silver wire is left pointing 
down the rod.
Step 17
When the Viking Knit is stretched 
down, it will become TWO TIMES 
longer. Measure the Silver wire and 
continue as needed,
 
вверх^ к полной версии понравилось! в evernote


Вы сейчас не можете прокомментировать это сообщение.

Дневник Цепь | ULTRAGRIN - Дневник ULTRAGRIN | Лента друзей ULTRAGRIN / Полная версия Добавить в друзья Страницы: раньше»