Materials and tools

• plastic tubes of four different diameters (from 6 m)
• hacksaw
• glue
• gold enamel in the can
• cartridge
• electric cord

1 . Plastic tubes be cut with a hacksaw at the ring width of about 1,5 cm

2. Of the five rings of glue the pieces : three rectangles and two squares . As a template using a sheet of paper : Put the rings of different diameters on the sheet and glued together by a transparent quick- adhesive .

3 . These pieces combine a 90 degree angle and measure the adhesive. Rings of small diameter use as auxiliary , connecting lines between them.

4. The lamp is ready , it remains only to attach a cartridge with the same rings. Put the cartridge into and paste to ring anchorages .

5. Light gold with enamel paint from a container .

Masterclasses

Other materials facilities