• Авторизация


box with cloth pins 09-03-2012 00:21 к комментариям - к полной версии - понравилось!


 taken from uzoranet in the barrel of the pegs. Master Class.[Info]

Materials:

Cut the piece of cloth measuring about 13 by 10.5 cm

[500x]

Making the incision 0.5 cm from one end (which goes down the banks)

[500x]

Lubricate the inside with white glue to the bank

[500x]

It also lubricates the tissue adhesive

[500x]

Glue into the fabric of the banks, fluff, butt stuck to the edge. If the fabric is long - it is better to pull out and cut off the excess

[500x]

Incision from the top edge of the fabric

[500x]

Turn down the outside and glue

[500x]

Cut a circle out of cardboard slightly smaller diameter cans and a piece of fabric for the bottom

[500x]

Glue cardboard on the wrong side of fabric, make cuts on the fabric around the perimeter of

[500x]

Wrap and glue the fabric edges

[500x]

Glue in the bottom of a jar

[500x]

Assort into two parts-made towels. It took me 12 pieces

[500x]

Hot glue gun clothespins.

[500x]

Already obtained very similar to the keg.

[500x]

It remains to decorate. Swathes of the lower part of the hemp rope

[500x]

Now the upper winds.

Better to fix the rope between the clothespins with glue

[500x]

[500x]

The edge of the banks, too, winds hemp

[500x]

Making the cover. Cut several circles out of cardboard. They have to go inside the lid of the Pringlsov. The same diameter and cut a thick felt padding polyester.And a piece of cloth with a diameter greater than the cap - taking into account the bending of tissue

[500x]

Putting a kind of sandwich: first put the lid on cardboard on top and then felt. Better each layer lightly greased with glue-type torque-Crystal. Close the top with a cloth

[500x]

Trim edge, glue lubricates, bend and glue the fabric on the cover

[500x]

Pierces the center of the hole,

[500x]

Screwed from the inside cover screw.

[500x]

On the front side, at the end of the screw fasten wooden bead

[500x]

Now we make on our cover ledge, which will include the inside of the banks and not to move down cover. Cut out of cardboard several circles with a diameter slightly smaller than the diameter of the inside bank

[500x]

Glue the circles. If you have a thick cardboard - Mauger cut a circle. I'm fine - I glued 4 cup.

Tissue glued over

[500x]

And the glue to the underside of the lid

[500x]

Glue the edge of the lid jute rope

[500x]

And now - the result of

[500x]

[500x]

[500x]

You can stick a couple of ladybugs from the magazine for florists

[500x]
Author: Iryna Lysenko. 
B 's log

http://marevo14.livejournal.com/
вверх^ к полной версии понравилось! в evernote


Вы сейчас не можете прокомментировать это сообщение.

Дневник box with cloth pins | M_A_G_D_A - Дневник MAGDA | Лента друзей M_A_G_D_A / Полная версия Добавить в друзья Страницы: раньше»