Sparkler Mitts by Sybil R
20-03-2017 10:01
к комментариям - к полной версии
- понравилось!
Это цитата сообщения РИМИДАЛ Оригинальное сообщение
Sparkler Mitts by Sybil R
The mitts are worked flat in eight sections (from A to H). The diagram shows how shows how the sections form the complete mitt, how many stitches there in a full row.
Size and Gauge
This finished mitts measure 19cm in height - at their highest point. and about 19cm in circumference at the wrist.
11 rows of the used stitch (sctbl) equal 5 cm in height. And 12 stitches (sctbl) equal 5 cm in width.
Section A
Ridge 5: sctbl 20 (up to M2), turn, sctbl to last 3 sts, dec, sctbl 1, tc
Ridge 6: sctbl 22 (up to M1), turn, sctbl to last 3 sts, dec, sctbl 1, tc
Ridge 7: sctbl 18, turn, sctbl to end, tc
Ridge 8: sctbl 15, turn, sctbl to last 3 sts, dec, sctbl 1, tc
Ridge 9: sctbl 11, turn, sctbl to end, tc
Ridge 10: sctbl 8, turn, sctbl to last 3 sts, dec, sctbl 1, tc
Ridge 11: sctbl 20 (up to and including M1), turn, sctbl to end, tc
Now you should have a total of 28 sts
Your piece should now look similar to picture 1 of the illustration photos.
Section C
Ridge 1: sctbl to end, tc; turn, sctbl all while replacing to of the markers, M1 in the 9th stitch and M2 in the 12th stitch, tc
Ridge 2: sctbl 7, turn, sctbl to end, tc
Ridge 3: sctbl 12, turn sctbl to end, tc
Ridge 4: sctbl 16 (up to M2), turn, sctbl to end, tc
Ridge 5: sctbl 19 (up to M1), turn, sctbl to end, tc
Ridge 6: sctbl 15, turn, sctbl to end, tc
Ridge 7: sctbl 10, turn, sctbl to end, tc
Ridge 8: sctbl 6, turn, sctbl to end, tc
Now you should still have a total of 28 sts
Section D
Ridge 1: sctbl to end, tc; turn, sctbl all while replacing to of the markers, M1 in the 9th stitch and M2 in the 12th stitch, place marker B into the last stitch of this row, tc
Ridge 2: sctbl 7, turn, sctbl to end, tc
Ridge 3: sctbl 14, turn, sctbl to last 3 sts, dec, sctbl 1, tc
Ridge 4: sctbl 15 (up to M2), turn, sctbl to end, tc
Ridge 5: sctbl 18 (up to M1), turn, sctbl to last 3 sts, dec, sctbl 1, tc
Ridge 6: sctbl 14, turn, sctbl to end, tc
Ridge 7: sctbl 11, turn, sctbl to end, tc
Ridge 8: sctbl 7, turn, sctbl to end tc
Now you should have a total of 26 sts
Your piece should now look similar to picture 2 of the illustration photos.
Ridge 9: sctbl to end, tc; turn, sctbl to end, tc
Section E (= section D backwards)
Ridge 1: sctbl 7, turn, sctbl to end, tc
Ridge 2: sctbl 11, turn, sctbl to end, tc
Ridge 3: sctbl 14, turn, sctbl to end, tc
Ridge 4: sctbl 18, turn, sctbl to last 2 sts, inc, sctbl 1, tc
Ridge 5: sctbl 15, turn, sctbl to end, tc
Ridge 6: sctbl 14, turn, sctbl to last 2 sts, inc, sctbl 1, tc
Ridge 7: sctbl 7, turn, sctbl to end, tc
Ridge 8: sctbl to end, tc; turn, sctbl to last (while replacing to of the markers, M1 in the 9th stitch and M2 in the 12th stitch), fold your mitt along the folding line (right sides together) and connect last st to first st in row marked with marker B.
You should now have 28 sts.
Now your piece should look like picture 3 of the illustration photos.
Section F (= section C backwards)
Ridge 1: sctbl 6, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 2: sctbl 10, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 3: sctbl 15, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 4: sctbl 19, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 5: sctbl 16, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 6: sctbl 12, turn sctbl to last stitch before end, connect and turn with slip stitch
Ridge 7: sctbl 7, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 8: sctbl to end, tc; turn, sctbl last stitch before end, connect and turn with slip stitch - while replacing to of the markers, M1 in the 9th stitch and M2 in the 12th stitch
You should still have 28 sts.
Section G (= section B backwards)
Ridge 1: sctbl 20, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 2: sctbl 8, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Ridge 3: sctbl 11, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 4: sctbl 15, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Ridge 5: sctbl 18, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 6: sctbl 22, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Ridge 7: sctbl 20, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Ridge 8: sctbl 18, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Ridge 9: sctbl 13, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Ridge 10: sctbl 7, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Section H (= section A backwards … nearly)
вверх^
к полной версии
понравилось!
в evernote
Это цитата сообщения РИМИДАЛ Оригинальное сообщение
Sparkler Mitts by Sybil R
[300x292]
[700x680]
[показать]
[показать]
Materials
-
3mm crochet hook
-
about 40 to 45 grams of fingering weight yarn
-
4 removable stitch markers
-
a tapestry needle to weave in ends
Techniques and Abbreviations
- tc: turning-chain
- sctbl: single crochet through back loop: http://crochet.about.com/od/crochetterms/tp/back-loops-only-or-blo.htm
- dec or sctog: dec or sctog: decrease by working 2 single crochet stitches together (in case of this pattern all dec sts are crocheted through the back loop of the 2 underlying stitches: http://www.dummies.com/how-to/content/how-to-decrease-single-crochet.html
- inc: increase by working 2 single crochet stitches into 1 sc below (in case of this pattern all increases are stitched through the back loop of the stitch below): http://www.dummies.com/how-to/content/how-to-increase-with-single-crochet.html
- ridge: in this pattern I use the term "ridge" to describe two rows of sctbl stitches.
- crochet short rows (as done in this pattern (*)): work sc's (or sctbl's) up to the stitch indicated, then turn work (without a turning-chain) and start into the 2nd sc; when you're working over this turn in a following row, always crochet into the turning-sc as well. See pictures below. (*) there may be different methods out there, feel free to try them.
 [700x524] |
| Short Rows |
- connect and turn with slip stitch: join the last stitch of one row to the edge of another side: insert your hook into the last stitch of the row AND into the stitch of the part you want to connect with (called here: the other side) - see picture 1 below. Yarn over and draw yarn through two loops (picture 2 below). Then complete the sc. Do a slip stitch into the next row on the other side before starting the next row (picture 3 below).
 [700x377] |
| Connect and Turn with Slip Stitch |
- join with single crochet: as shown in this YouTube video by tlcinspirations - however, in this pattern it's not used to join one side to the other, but to join the last row to the very first row.
General Construction
It also shows the mitt is to be folded and which parts are to be attached to which when finishing the mitts (or while you're knitting section F and G). Sections E, F, G, and H are mirror images of sections D, C, B, and A respectively, i.e. where there is an increase in A, there is an decrease in H - and the short row lenghts are mirrored as well.
Size and Gauge
This finished mitts measure 19cm in height - at their highest point. and about 19cm in circumference at the wrist.
11 rows of the used stitch (sctbl) equal 5 cm in height. And 12 stitches (sctbl) equal 5 cm in width.
Instructions
Section A
Chain 34 + 1 turning-chain
Ridge 1 : sctbl to end, tc; turn, sctbl all while placing to of the markers, M1 in the 9th stitch and M2 in the 12th stitch, tc
Ridge 2: sctbl 7, turn, sctbl to end, tc
Ridge 3: sctbl 13, turn, sctbl to end, tc
Ridge 4: sctbl 19, turn, sctbl to end, tc
Ridge 5: sctbl 25 (up to M1), turn, sctbl to last 2 sts, inc, sctbl1, tc
Ridge 6: sctbl 20, turn, sctbl to end, tc
Ridge 7: sctbl 15, turn, sctbl to end, tc
Ridge 8: sctbl 8, turn, sctbl to end, tc
Now you should have a total of 35 stitches
Section B
Ridge 1: sctbl to end, tc; turn, sctbl all while replacing to of the markers, M1 in the 9th stitch and M2 in the 12th stitch. tc, place marker A into the last st of that row
Ridge 2: sctbl 7, turn, sctbl to last 3 sts, dec, sctbl1, tc
Ridge 3: sctbl 13, turn, sctbl to last 3 sts, dec, sctbl1, tc
Ridge 4: sctbl 18, turn, sctbl to last 3 sts, dec, sctbl1, tc
Ridge 6: sctbl 22 (up to M1), turn, sctbl to last 3 sts, dec, sctbl 1, tc
Ridge 7: sctbl 18, turn, sctbl to end, tc
Ridge 8: sctbl 15, turn, sctbl to last 3 sts, dec, sctbl 1, tc
Ridge 9: sctbl 11, turn, sctbl to end, tc
Ridge 10: sctbl 8, turn, sctbl to last 3 sts, dec, sctbl 1, tc
Ridge 11: sctbl 20 (up to and including M1), turn, sctbl to end, tc
Now you should have a total of 28 sts
Your piece should now look similar to picture 1 of the illustration photos.
 [700x700] |
| Illustration Photos |
Ridge 1: sctbl to end, tc; turn, sctbl all while replacing to of the markers, M1 in the 9th stitch and M2 in the 12th stitch, tc
Ridge 2: sctbl 7, turn, sctbl to end, tc
Ridge 3: sctbl 12, turn sctbl to end, tc
Ridge 4: sctbl 16 (up to M2), turn, sctbl to end, tc
Ridge 5: sctbl 19 (up to M1), turn, sctbl to end, tc
Ridge 6: sctbl 15, turn, sctbl to end, tc
Ridge 7: sctbl 10, turn, sctbl to end, tc
Ridge 8: sctbl 6, turn, sctbl to end, tc
Now you should still have a total of 28 sts
Section D
Ridge 1: sctbl to end, tc; turn, sctbl all while replacing to of the markers, M1 in the 9th stitch and M2 in the 12th stitch, place marker B into the last stitch of this row, tc
Ridge 2: sctbl 7, turn, sctbl to end, tc
Ridge 3: sctbl 14, turn, sctbl to last 3 sts, dec, sctbl 1, tc
Ridge 4: sctbl 15 (up to M2), turn, sctbl to end, tc
Ridge 5: sctbl 18 (up to M1), turn, sctbl to last 3 sts, dec, sctbl 1, tc
Ridge 6: sctbl 14, turn, sctbl to end, tc
Ridge 7: sctbl 11, turn, sctbl to end, tc
Ridge 8: sctbl 7, turn, sctbl to end tc
Now you should have a total of 26 sts
Your piece should now look similar to picture 2 of the illustration photos.
Ridge 9: sctbl to end, tc; turn, sctbl to end, tc
Section E (= section D backwards)
Ridge 1: sctbl 7, turn, sctbl to end, tc
Ridge 2: sctbl 11, turn, sctbl to end, tc
Ridge 3: sctbl 14, turn, sctbl to end, tc
Ridge 4: sctbl 18, turn, sctbl to last 2 sts, inc, sctbl 1, tc
Ridge 5: sctbl 15, turn, sctbl to end, tc
Ridge 6: sctbl 14, turn, sctbl to last 2 sts, inc, sctbl 1, tc
Ridge 7: sctbl 7, turn, sctbl to end, tc
Ridge 8: sctbl to end, tc; turn, sctbl to last (while replacing to of the markers, M1 in the 9th stitch and M2 in the 12th stitch), fold your mitt along the folding line (right sides together) and connect last st to first st in row marked with marker B.
You should now have 28 sts.
Now your piece should look like picture 3 of the illustration photos.
Section F (= section C backwards)
Ridge 1: sctbl 6, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 2: sctbl 10, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 3: sctbl 15, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 4: sctbl 19, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 5: sctbl 16, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 6: sctbl 12, turn sctbl to last stitch before end, connect and turn with slip stitch
Ridge 7: sctbl 7, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 8: sctbl to end, tc; turn, sctbl last stitch before end, connect and turn with slip stitch - while replacing to of the markers, M1 in the 9th stitch and M2 in the 12th stitch
You should still have 28 sts.
Section G (= section B backwards)
Ridge 1: sctbl 20, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 2: sctbl 8, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Ridge 3: sctbl 11, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 4: sctbl 15, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Ridge 5: sctbl 18, turn, sctbl to last stitch before end, connect and turn with slip stitch
Ridge 6: sctbl 22, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Ridge 7: sctbl 20, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Ridge 8: sctbl 18, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Ridge 9: sctbl 13, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Ridge 10: sctbl 7, turn, sctbl to last 2 sts, inc, connect and turn with slip stitch
Ridge 11: sctbl to end, tc, turn, sctbl to last stitch before end, connect (you should now connect your row to the row marked with marker A) - while replacing to of the markers, M1 in the 9th stitch and M2 in the 12th stitch, tc
You should now have 35 stitches.
Section H (= section A backwards … nearly)
Ridge 1: sctbl 8, turn, sctbl to end, tc
Ridge 2: sctbl 15, turn, sctbl to end, tc
Ridge 3: sctbl 20, turn, sctbl to end, tc
Ridge 4: sctbl 25 (up to M1), turn, sctbl to last 3 sts, dec, sctbl1
Ridge 5: sctbl 19, turn, sctbl to end, tc
Ridge 6: sctbl 13, turn, sctbl to end, tc
Ridge 7: sctbl 7, turn, sctbl to end, tc
Ridge 2: sctbl 15, turn, sctbl to end, tc
Ridge 3: sctbl 20, turn, sctbl to end, tc
Ridge 4: sctbl 25 (up to M1), turn, sctbl to last 3 sts, dec, sctbl1
Ridge 5: sctbl 19, turn, sctbl to end, tc
Ridge 6: sctbl 13, turn, sctbl to end, tc
Ridge 7: sctbl 7, turn, sctbl to end, tc
Ridge 8: sctlb 31, turn, sctbl to end, tc
Ridge 9: sctbl all, tc; turn, join all stitches to first row with single crochets.
Ridge 9: sctbl all, tc; turn, join all stitches to first row with single crochets.
Weave in ends.
Make two.
Вы сейчас не можете прокомментировать это сообщение.
Дневник Sparkler Mitts by Sybil R | Ульчия - Дневник Ульчия |
Лента друзей Ульчия
/ Полная версия
Добавить в друзья
Страницы:
раньше»